產品名稱：蒸汽回火真空爐

Name: Steam tempering vacuum furnace

用途：高速鋼刀具，模具，杠工具，硅鋼片，電機定子，轉子，金屬刀片的蒸汽熱處理，處理后耐磨性，防銹，防腐，絕緣性良好

Application: steam heat treatment of high speed steel tool, die, bar tool, silicon steel sheet, motor stator, rotor and metal blade, wear resistance, antirust, anticorrosion and insulation after treatment

 特點 /characteristic：

1.全自動程序控制，運行平穩，工藝重視性好，人機界面可選

. Automatic program control, stable operation, good process re-view, optional man-machine interface

   2 ..輻射管加熱，加熱室可制成圓形或方形，熱風機強力循環，無死角，溫度均勻

.  The radiation tube or nickel strip is heated, the heating chamber can be made into circle or square, the hot fan has strong circulation, no dead angle, and the temperature is uniform. 

3．蒸汽發生器為不銹鋼材質，采用不銹鋼高溫閥及流量控制

The steam generator is made of stainless steel, which adopts stainless steel high temperature valve and flow control.

4.設真空隔膜閥及壓力觸感器，條件達到自動置換新鮮介質

The vacuum diaphragm valve and the pressure contact sensor are set up, and the conditions are up to the automatic replacement of the fresh medium.。

 配置選擇/Configure select:

產品 規格/  Specifications：

注：特殊規格要求可根據客戶要求定制

Note: Special specification requirements can be customized according to customer requirements

以下參數可根據工藝要求調整，不作為驗收依據，具體以技術方案和協議為準

The following parameters may be adjusted according to the process requirements and shall not be used as the basis for acceptance, depending on the technical scheme and agreement