規格：見技術參數 /Specification:  Technical parameters attached

適用于高合金工具鋼、模具鋼、軸承鋼、高速鋼、電工磁性材料、有色金屬、不銹鋼及精密合金材料的光亮退火、時效硬化處理；有色金屬的再結晶時效處理

It is suitable for bright annealing and aging hardening of high alloy tool steel, die steel, bearing steel, high speed steel, electrician magnetic material, non-ferrous metal, stainless steel and precision alloy material.。

特點 /characteristic：

1.  加熱元件采用多區控溫布置，溫度均勻性達±3℃

The heating element is arranged by multi-zone temperature control, and the temperature uniformity is up to ±3 ℃.

2.  采用石墨氈/金屬屏為加熱室隔熱層

Using graphite felt / metal screen as heat insulation layer in heating chamber.

3.  對流風機攪拌循環，加熱時間短，熱效率高

The mixing cycle of countercurrent fan is short in heating time and high in thermal efficiency.。

4.  編程工藝靈活輸入，機械動作穩定可靠，故障自動報警/顯示

Flexible input of programming process, stable and reliable mechanical action, automatic alarm / display of fault.

5.  風機變頻驅動、熱區九點測溫

Fan frequency conversion drive, hot zone 9 temperature measurement。　　

6.  全智能化工業計算機控制系統并有一套手動操作系統

Fully intelligent chemical industry computer control system and a manual operating system。

7.  操作簡潔、編程工藝靈活輸入、機械動作穩定可靠

Simple operation, flexible input of programming process, stable and reliable mechanical action.

8.  手動/半自動/自動 故障自動報警/顯示

Manual / semi-automatic / automatic fault automatic alarm / display.

配置選擇/Configure select:

產品 規格/ Specifications：

注：特殊規格要求可根據客戶要求定制

Note: Special specification requirements can be customized according to customer requirements

以下參數可根據工藝要求調整，不作為驗收依據，具體以技術方案和協議為準

The following parameters may be adjusted according to the process requirements and shall not be used as the basis for acceptance, depending on the technical scheme and agreement